❏ Interleaved 2-of-5 treats every two characters as one set. When there are an odd number of characters, EPSON
ITF fonts automatically add a zero to the beginning of the character string.
Character type Numbers (0 to 9)
Number of characters No limit
Font size When OCR-B is not used: 26 pt to 96 pt. Recommended sizes are 26 pt, 52 pt and 78 pt.
When OCR-B is used: 36 pt to 96 pt. Recommended sizes are 36 pt and 72 pt.
e following codes are inserted automatically and need not be input by hand:
❏ Le/Right quiet zone
❏ Start/Stop character
❏ Check digit
❏ e numeral “0” (added to the beginning of character strings as needed)
Print sample
EPSON ITF EPSON ITF CD
EPSON ITF Num EPSON ITF CD Num
EPSON Codabar
❏ Four EPSON Codabar are available, allowing you to enable and disable the automatic insertion of check digits
and OCR-B.
❏
e
height of the bar code is automatically adjusted to 15% or more of its total length, in conformance to the
Codabar standard. For this reason, it is important to keep at least one space between the bar code and the
surrounding text to prevent overlapping.
❏ When either a Start or a Stop character is input, Codabar fonts automatically insert the complementary
character.
❏ If neither a Start nor a Stop character is input, these characters are automatically input as the letter “A”.
Character type Numbers (0 to 9)
Symbols (- $ : / . +)
Number of characters No limit
Font size When OCR-B is not used: 26 pt to 96 pt. Recommended sizes are 26 pt, 52 pt and 78 pt.
When OCR-B is used: 36 pt to 96 pt. Recommended sizes are 36 pt and 72 pt.
e following codes are inserted automatically and need not be input by hand:
❏
Le/Right
quiet zone
Product Information
>
Font Specications
>
Epson BarCode Fonts (Windows Only)
464
To Next Page
Loading...
Need help?
General
