Evinrude E-tec 75 HP - Flywheel and Stator Servicing; Flywheel Removal

110
ELECTRICAL AND IGNITION
FLYWHEEL AND STATOR SERVICING
FLYWHEEL AND STATOR
SERVICING
IMPORTANT: Weak flywheel mag nets can
cause lo w alternator output and af fect outboard
performance. W eak flywheel magn ets ca n also
cause low read ings on ignition test equipme nt,
such as a pe ak-reading voltmeter , which might
cause unnecessary parts replacement.
An accurate test o f alternat or o utput can he lp
determine the flywh eel’s co ndition. Refer to
CHARGING SYSTEM TESTS on p. 98.
Flywheel Removal
Remove the recoil st arter asse mbly (rope st art
models). Refer to RECOIL STARTER REMOVAL
on p. 363.
Remove the electrical cover from flywheel cover.
Disconnect wiring harne ss and remo ve wiring
from cover.
Remove fuse holder from flywheel cover.
Lift flywheel cover to remove.
A WARNING
To prevent accidental starting while ser-
vicing, disconnect the battery cables at
battery.
1. Electrical cover 002084
1
1. MWS harness 002086
1. Fuse holder 002094
002087
1
1