247
MIDSECTION
EXHAUST HOUSING, 75 – 90 HP
11
If re moved, coat the lower mount s with soap y
water and press into the exhaust housing with the
“OUTSIDE” mark facing outward.
Install t he mou nt covers. Ap ply Nut Lock to
screws, install washers and screws, and tighten to
a torque of 150 to 180 in. lbs. (17 to 20 N·m).
Exhaust Housing Installation
Bring the exhaust housing into position with th e
stern bracket.
Install four new lower mount screws with lock-
patch. Tighten screws to a torque of 38 to 45 ft.
lbs. (51 to 61 N·m).
Install gearcase. Refer to GEARCASE REMOVAL
AND INSTALLATION on p. 296.
Install powerhea d. Refer to POWERHEAD
INSTALLATION on p. 216.
001970
001972
20” Models 23036
25” Models 32590
To Next Page
Loading...
