Evinrude E-tec 75 HP - Exhaust Housing Disassembly

248
MIDSECTION
EXHAUST HOUSING, 75 – 90 HP
Exhaust Housing Disassembly
Remove the front and rear screws retaining the
adapter/inner exhaust hou sing to the e xhaust
housing.
Lift the a dapter/inner exhaust housing o ut of the
exhaust housing.
Remove the three upp er screws and thre e lower
screws securing the inne r exhaust housing to the
adapter housing.
Remove the wa ter tube from the inne r exhaust
housing. Discard water tube grommet.
Remove the se al from the bott om flan ge of the
inner exhaust housing.
Remove t he fou r screws secu ring t he exhaust
megaphone to the adapter housing.
1. Adapter retaining screws 001981
001980
1. Upper inner exhaust housing screws 001975
11
11
1. Lower inner exhaust housing screws 001974
1. Water tube grommet 001984
1. Adapter to megaphone screws
2. Exhaust megaphone
001976
11
1
1
1
2