69
ENGINE MANAGEMENT MODULE (EMM)
DIAGNOSTIC SOFTWARE FUNCTIONS
4
Reports
Engine rep orts provide service records and can
be used to document the running history of an out-
board. Reviewing this info rmation can help iden-
tify or resolve some service issues.
Click the print button in a windo w of the diagnos-
tics software to print engine data, or to export the
information to a computer file.
Software Replacement
Engine Manag ement Sof tware is loaded into th e
EMM at the factory. Periodically, a new program
may be available to enhance the opera tion of an
outboard. Select Engine Software Update from
the Utilities menu and refer to the instructions pro-
vided with the program.
IMPORTANT: If using Diagnostic Power Supply
Tool, P/N 587005, to supply po wer to th e EMM,
use Accessory Power Cable Kit, P/N 5008092, to
connect a n externa l 12 volt bat tery to the Power
Supply Tool.
If the internal batte ries of the Power Supply T ool
have a low volt age condition the EMM could turn
OFF durin g the so ftware up load, resulting in a
failed software update.
1. Print button
2. Print/Export options
008592
Engine Report data files
1. Exports button
2. Data files
008593
1. Software Update button 008594
1. Power supply tool 007279
To Next Page
Loading...
