135
FUEL SYSTEM
COMPONENTS
7
The EMM is programmed to compensate for vari-
ations in fuel flow. Each injector and its location on
the outboard is identified by the EMM. DO NOT
install an injector without updating the compensa-
tion software.
Each service injector includes it s fuel flow infor-
mation on a 3.5 in. flo ppy disk. Th is sof tware
allows the EMM to be reprogrammed for this injec-
tor’s unique fuel flow characteristics.
Fuel injectors MUST NOT be moved
from one cylinder to another. EMM program-
ming is associated with the cylinder location
of each injector. Installing an injector on the
wrong cylinder can result in powerhead fail-
ure.
Injector Fuel Supply
Fuel is supplied to the injectors by the fuel circula-
tion pump and the fuel supply manifold.
Each inje ctor ha s int ernal fu el p assages. These
passages are designed to:
• Provide fuel to the injector's injection chamber
• Route fu el through the injector hou sing to coo l
the injector coil and armature
006619
To Next Page
Loading...
