359
TRIM AND TILT
TRIM AND TILT SERVICE
13
Fill the oil reservoir up to the fill plug with
Evinrude/Johnson Biodegr adable TNT Fluid.
Install the fill plug.
Run the motor, t hen re check o il leve l. Cycle the
unit several times and check the oil level when the
cylinder is fully e xtended. Oil should be level with
bottom of fill port. Install and tighten the fill plug to
a torque of 45 to 55 in. lbs. (5 to 6 N·m).
40 - 60 HP Models 007646
75 - 90 HP Models 004278
To Next Page
Loading...
