Festo CECX-X-C1 Series User Manual

FED/VipWin interface
18
Fig.: "Set object attributes" dialog box (sample selection)
6. Repeat point 5 if you would like to add more variables with other options.
7. Click OK to close the "Set object attributes" dialog box. All modified configurations are then applied.
8. When you want to generate the symbol file, simply compile the project. The symbol file is created and
stored in the project directory.

Festo CECX-X-C1 Series Specifications

General

Brand	Festo
Model	CECX-X-C1 Series
Category	Controller
Language	English