Fore Systems ES-2810 - Changing Number of Errors before Adaptive Forwarding Mode Operates3-22

3 - 22
FORE Systems ES-2810 Ethernet Switch User's Manual
Standard Configuration
3.14.3 Changing Number of Errors Before Adaptive Forwarding
Mode Operates
Adaptive forwarding changes the forwarding mode depending on the upper and lower limits
of specific error types. To change the number of upper and lower limits:
1. Select Device Setup or Stack Setup.
2. Click Switching.
3. Click Advanced.
4. Click the required parameter.
5. Type the percentage of errors or runts.
6. Click OK.