Fore Systems ES-2810 - Transferring Files to and from the Switch Using TFTP

FORE Systems ES-2810 Ethernet Switch User's Manual
7 - 17
Console Port Use and Troubleshooting
Console Port Use and
Troubleshooting
7.9.3 Transferring Files to and From the Switch using TFTP
To transfer files using TFTP:
1. At the command prompt, start a TFTP session with the switch.
2. To obtain a directory listing of all the files on the switch, type: get dir.
3. Examine the directory listing to confirm the names of the files present in the switch.
Report, log and filter files and a parameter file with a .p or .nvp extension
appear in the directory listing.
4. To retrieve the file that you want, type: get <
filename >.
NOTE
If you “get” a report, then the report file is
generated on-the-fly and transferred.
5. If the TFTP access is password protected, type:
get<
password >/< filename >
For example, get edinburgh/report.