Fore Systems ES-2810 - Changing the Forward Delay Expiry Time; Changing the State of the Ports

3 - 26
FORE Systems ES-2810 Ethernet Switch User's Manual
Standard Configuration
3.15.7 Changing the Forward Delay Expiry Time
To change the time between port states while the bridge attempts to become the root:
1. Select Device Setup or Stack Setup.
2. Click Spanning Tree.
3. Click Forward Delay Timer Expiry.
4. Type the required number of seconds.
5. Click OK.
3.15.8 Changing the State of the Ports
To specify that all ports are using Spanning Tree Protocol:
1. Select Device Setup or Stack Setup.
2. Click Spanning Tree.
3. Click Enable All Ports.
The ports are able to resolve problematic network loops using STP.
4. Click OK.