Fore Systems ES-2810 - Installation and Removal; To Start the Installation of FORE Stack View; To Install FORE Stack View for Windows

FORE Systems ES-2810 Ethernet Switch User’s Manual
2 - 3
FORE Stack View
FORE Stack View
2.3 Installation and Removal
2.3.1 To start the installation of FORE Stack View
Normally, the Setup program for FORE Stack View will start automatically after you insert the
compact disc (CD) in your CD ROM drive. However, if it does not, use the standard Windows
procedures for installing programs. The screen shown in Figure 2.1 is displayed.
Figure 2.1 -
The Start-up Screen for FORE Stack View Installation
2.3.2 To Install FORE Stack View for Windows
Click Install Windows and follow the on-screen instructions. When the installation is com-
plete, FORE Stack View will start automatically when “Launch FORE Stack View” is selected.