FORE Systems ES-2810 Ethernet Switch User’s Manual
2 - 23
FORE Stack View
FORE Stack View
2.11.4 Right Mouse Button Commands for a Stack Border
When managing a stack of switches, right click the stack border to access the functions
described in Table 2.6.
Table 2.6 -
Right Click Command Options for Stack Borders
Functions Description
Stack Setup Displays comprehensive information about the switch’s overall
setup.
VLAN/Routing Setup Provides an overview of existing VLANs and the opportunity to
add new ones or change existing ones.
IP Filtering Setup Defines user groups and filters the packets sent to them.
Stack Health Monitor Provides the IP addresses for all the switches in the stack, the type
of switch and whether they are responding to ping.
IntraStack Traffic Gives information about the traffic through the Matrix Module.
System Information Gives the name and location of the stack, together with a contact
name and the length of time the stack has been running.
Stack Activity Displays as graphs monitoring information of traffic on the ports
in the stack.
Port Overview Provides port performance, packet distribution and spanning tree
information for all the ports in the stack.
Device Enables you to reboot the stack and provides information about
the firmware in the switches.
Configuration Ensures the stack’s configuration is safe by saving it to the flash
memory, by backing up to disk and by being able to restore it again
should it be lost. If necessary, the stack can be returned to the fac-
tory default configuration.
Monitoring Provides Hardware information about the separate switches in the
stacks and the access rights to the devices on the LAN.
Tools Gives access to the Synchronization Manage, the Switch Position
Organizer and Color Code Matrix Ports function.
To Next Page
Loading...
