Fore Systems ES-2810 - Power Supply to a Rack

FORE Systems ES-2810 Ethernet Switch User’s Manual
1 - 17
Introduction to the ES-2810
Introduction to the ES-
2810
1.8.3 Power Supply to a Rack
If the switch is installed in a rack, make sure the rack’s power supply socket has a ground con-
nection and the rack is connected to a branch supply or a power supply socket with a ground
connection.
To avoid overloading the circuit and damaging the wiring of the power supply, the power
supply to the rack must be adequate to cover the extra power consumed by the switch.