Fore Systems ES-2810 - Bootptab File Entry

7 - 8
FORE Systems ES-2810 Ethernet Switch User's Manual
Console Port Use and Troubleshooting
7.4.5 Bootptab File Entry
The entry for the switch in the bootptab should contain a line similar to:
:bf=/FORE/switch/es2810_x.xx:
This instructs the switch to load the switch software from the bootp/tftp server. Use the FORE
Stack View application to configure the switch manually, or transfer the ixxxxxxx.p file con-
taining the configuration from a TFTP server to the switch.