Fore Systems ES-2810 - Right Mouse Button Commands

FORE Systems ES-2810 Ethernet Switch User’s Manual
2 - 19
FORE Stack View
FORE Stack View
2.10.4 Right Mouse Button Commands
By positioning the mouse pointer in the Device Tree and clicking the right mouse button, the
following functions are available:
Table 2.3 -
Right Click Command Options in the Device Tree
Is a Device
Selected?
Available Functions Description
No View IP Address Sorts the devices by their IP addresses.
Name Sorts the devices by their DNS names.
Add Device If a device has not been auto-detected then
you can add it to the tree. You need to know
its IP address.
Find Locates a specific device by searching for its
IP address.
Refresh Polls the network and redisplays the tree. If a
new device has been connected, it will appear
after a refresh.
Yes Launch With Opens the switch in FORE Stack View.
Delete Removes a device from the Device Tree.
Edit Change the name, community settings (read
and write) and polling rate of the device.
RMON Statistics Provides subnet management statistics.
History Lists monitored traffic on a subnet.
Alarms Enables activity alarms to be set.
Logs Sets events defined by Log, Trap or Log and
Trap.