Fore Systems ES-2810 - Ports with IP Learning

FORE Systems ES-2810 Ethernet Switch User's Manual
4 - 7
Advanced Configuration
Advanced
Configuration
4.2.8 Ports with IP Learning
IP learning must be enabled when using IP policies. (IP learning is enabled on all ports by
default.) If you want to change the settings for individual ports, for example if you are using
protocols other that IP protocols and don’t want these stations to be learned using IP rules,
you should:
1. Select VLAN Setup.
2. Click Advanced.
3. Click IP Traffic. In the IP Traffic dialog box you can specify which ports sup-
port IP learning.
Figure 4.3 -
IP Traffic Dialog Box
4. Click OK.