Fore Systems ES-2810 - Monitoring the Faults on a Port; Monitoring the Distribution on a Port; Monitoring the Spanning Tree Statistics on a Port

5 - 26
FORE Systems ES-2810 Ethernet Switch User's Manual
Managing the Switch
5.8.3 Monitoring the Faults on a Port
Use the following procedure to monitor the faults on a specific port:
1. Right-click the port.
2. Select Port Details>Faults.
This table shows the total number errors, discards and observations transmitted
and received.
3. To change the display from numerical to graphical, click one or more of the num-
bers and select Tools>Graph.
4. Select Options>Reset Counters to set all these counters to zero.
5.8.4 Monitoring the Distribution on a Port
Use the following procedure to monitor the distribution percentages of unicast, multicast and
broadcast frames on a specific port:
1. Right-click the port.
2. Select Port Details>Distribution.
5.8.5 Monitoring the Spanning Tree Statistics on a Port
Use the following procedure to monitor the spanning tree statistics on a specific port:
1. Right-click the port.
2. Select Port Details>Spanning Tree.