Fore Systems ES-2810 - Page 3

CE NOTICE
Marking by the symbol CE indicates compliance of this system to the EMC (Electromagnetic Compatibility) directive of
the European Community and compliance to the Low Voltage (Safety) Directive. Such marking is indicative that this sys-
tem meets or exceeds the following technical standards:
•EN 55022 - “Limits and Methods of Measurement of Radio Interference Characteristics of Information Technol-
ogy Equipment.”
•EN 50082-1 - “Electromagnetic compatibility - Generic immunity standard Part 1: Residential, com-
mercial, and light industry.”
•IEC 1000-4-2 - “Electromagnetic compatibility for industrial-process measurement and control equip-
ment Part 2: Electrostatic discharge requirements.”
•IEC 1000-4-3 - “Electromagnetic compatibility for industrial-process measurement and control equip-
ment Part 3: Radiate electromagnetic field requirements.”
•IEC 1000-4-4 - “Electromagnetic compatibility for industrial-process measurement and control equip-
ment Part 4: Electrical fast transient/burst requirements.”
•IEC 1000-4-5 - “Electromagnetic compatibility - Generic immunity standard Part 5: Surge test.”
CERTIFICATIONS
ETL certified to meet Information Technology Equipment safety standards UL 1950, CSA 22.2 No. 950, and EN 60950.
TRADEMARKS
FORE Systems,
ForeRunner
, and
ForeView
are registered trademarks of FORE Systems, Inc.
ForeRunnerLE
and
CellPath
are
unregistered trademarks of FORE Systems, Inc. All other brands or product names are trademarks or registered trademarks of
their respective holders.