6 Scanning
153
5.
Configure the scan settings on [Scan Settings] as needed.
[Output Color]
Select the color mode when scanning a document.
[Scanner Type]
Specify whether to place a document on the document glass, or load a document in the Duplex Automatic
Document Feeder (DADF).
[Resolution]
Select the scan resolution rate when scanning a document.
[Document Size]
Select the document size to be scanned.
[Brightness]
Select the brightness when scanning a document.
[Contrast]
Specify the difference between the light and the dark. Clicking [+] makes the difference between the light
and the dark bigger, and clicking [-] makes the difference smaller.
6.
Click [Scan] to start scanning.
7.
Edit the scanned data in [Edit] as needed.
[Rotate]
Rotates or inverts the image.
[Crop]
Specify the image size to be trimmed.
8.
Specify the file format and the file name of the scanned data, and the location to save the scanned
data in [Save Settings].
[File Format]
Select the file format of the scanned data to be saved.
[File Name]
Specify the file name of the scanned data.
[Destination]
Select the location to store the scanned data.
[Details]
Select the folder to store the scanned data.
9.
Click [Save].
To Next Page
Loading...
