6 Scanning
119
6.2 Scanning Using the Operator Panel
of the Machine
6.2.1 Storing Scanned Data to a Computer
Storing to a Computer or Server With FTP/SMB (Scan to Network)
The Scan to Network feature allows you to store scanned data to a FTP server or to a shared folder on a
computer. You can also check the scanned data before storing.
To store scanned data, it is necessary to register a server or shared folder address in the address book
beforehand. Install the Address Book Editor on your computer as the addresses of the servers or shared folders
are registered using the Address Book Editor.
• Install the Address Book Editor by [Custom Installation] using the "Software/Product Manual" disc. For details about how
to install, see "Installing With [Custom Installation] (P.35)."
Storing to an FTP Server
The work flow from preparing to saving is as follows.
Registering the FTP Server Address in the Address Book
Register the FTP server address using the Address Book Editor. For details, see the Address Book Editor help.
• Use the US-ASCII characters for FTP server address and the folder path.
Storing Scanned Data to an FTP server.
1.
Load a document.
• For details about loading a document, see "Loading a Document (P.74)."
2.
Press the <Home> button.
Scan
Using FTP
Using SMB
FTP Server
Computer
Computer
To Next Page
Loading...
Need help?
General
Weight and Dimensions
