Fuji Xerox DocuCentre SC2022

User Guide
238
[Inch Series]
Inch series documents are automatically detected.
[Switch Original Size 1]
[8.5 x 13"]
Sets 8.5 x 13" as the document size that can be detected automatically.
[8.5 x 14"]
Sets 8.5 x 14" as the document size that can be detected automatically.
[Switch Original Size 2]
[B5]
Sets B5 as the document size that can be detected automatically.
[16K]
Sets 16K as the document size that can be detected automatically.
10.8.10 [Check Document Guide]
Specify whether to show a message when you need to check that the document guides of the Duplex Automatic
Document Feeder (DADF) are aligned properly.
10.8.11 [Default Paper Size]
Selects A4 or letter for paper size to print data whose size is not specified, such as reports.
10.8.12 [Fax Settings]
Specify the settings for the fax function.
[Fax Number]
Enter a fax number for the machine. The fax number is printed on the fax header.
[Country/Region]
Select the country where the machine is used.
[Company Name]
Enter the sender name. The sender name is printed on the fax header. Up to 23 characters can be entered.
[Fax Line Settings]
Configure the basic settings for the fax line.
[Line Type]
Select the line type.
[Line Monitor Tone Volume]
Select the volume level of the line monitor, which can be heard through the internal speaker until a connection is
made.
[DRPD Pattern]
Provides a separate number for faxing with a distinctive ring pattern.