User Guide
246
[Reset Passphrase]
Disconnects the Wi-Fi Direct connections and changes the passphrase.
[Print Passphrase]
Prints the passphrase.
[WPS Setup]
Configures the Wi-Fi Direct network with WPS.
[Push Button Configuration]
Configures the Wi-Fi Direct network with WPS (push button method).
[PIN Code]
Specify the Wi-Fi Direct network using the PIN code assigned to the machine.
[Reset PIN Code]
Change the PIN code.
[Print PIN Code]
Prints the PIN code.
10.9.3 [Ethernet]
• This setting item is available only when the machine is connected to a wired network.
Configure the wired network settings.
[IP Mode]
Select the IP mode.
[Dual Stack]
Uses both IPv4 and IPv6 to specify the IP address.
[IPv4]
Uses IPv4 to specify the IP address.
[IPv6]
Uses IPv6 to specify the IP address.
[TCP/IP]
Configure the TCP/IP settings.
[IP Addressing]
[DHCP/AutoIP]
Specifies the IP address automatically.
[BOOTP]
Specifies the IP address using BOOTP.
[RARP]
Specifies the IP address using RARP.
[DHCP]
Specifies the IP address using DHCP.
[Manual Input]
Specify the IP address manually.
To Next Page
Loading...
