10 Changing the Machine Settings
245
[Disable IPsec]
Disables IPsec communication.
• This setting is available only when [IPsec] is enabled on CentreWare Internet Services. For details, see the CentreWare
Internet Services Help.
[Reset Wi-Fi Settings]
Initializes wireless network settings. After performing this setting and restarting the machine, all the wireless
network settings are reset to their factory settings.
10.9.2 [Wi-Fi Direct]
• This setting is available only when the Ethernet cable is disconnected from the machine, and the optional Wireless LAN
Kit is connected to the machine.
• Wi-Fi Direct cannot be used in an IPv6 or Ad-hoc environment.
Configure the Wi-Fi Direct network settings.
[Wi-Fi Direct]
Specify whether to enable or disable the Wi-Fi Direct network.
[Group Role]
[Auto]
Automatically specifies the group role of the machine.
[Group Owner]
Sets the machine as the group owner of the Wi-Fi Direct network. When the machine is set to the group owner,
the machine functions as the access point or wireless router, and mobile devices can discover the machine.
[Device Name]
Enter the machine name that identifies the Wi-Fi Direct network with up to 32 alphanumeric characters.
When you select the machine name on your mobile device, find the name specified here.
[Paired Device]
Displays the status of the Wi-Fi Direct connections.
[Disconnect All] > [Disconnect Now]
Disconnects all the Wi-Fi Direct connections.
[Disconnect All] > [Disconnect and Reset Passphrase]
Disconnects the Wi-Fi Direct connections and changes the passphrase.
[SSID]
Displays the name that identifies the Wi-Fi Direct network. After "DIRECT-XX," enter up to 23 alphanumeric
characters. When you select the Wi-Fi Direct network name on your mobile device, find the name specified here.
[Passphrase]
Displays the passphrase. Enter the passphrase displayed here when you connect to the Wi-Fi Direct network
from your mobile device.
To Next Page
Loading...
