10 Changing the Machine Settings
261
[Lead/Side Registration]
Adjusts the position of the printed image in the direction of the paper length (Lead Regi (L)) and paper width
(Side Regi (S)) for each paper tray.
[Perpendicularity]
Adjusts the perpendicularity of the image.
10.12.5 [Adjust Color Registration]
Adjusts the color registration. Use this menu when the machine is installed or after the machine is moved.
10.12.6 [Quick Density Adjust]
Corrects the toner density automatically. Perform the correction if the toner density seems improper, or when
you need a more precise print result.
10.12.7 [Calibration]
Performs the automatic calibration. When the density or reproductivity of color deteriorates when copying or
printing, specify the target function and perform the calibration for that function.
10.12.8 [Initialize NVM]
Initializes the non-volatile (NV) memory. After performing this setting and restarting the machine, all the menu
parameters are reset to their factory settings.
[Fax Settings]
Deletes the following data registered in the machine: fax number, sender name, and fax number/e-mail
addresses/server address to which incoming faxes are forwarded.
[Scan Settings]
Deletes the server addresses registered in the machine.
[User Account Settings]
Resets the [Home] screen and widget tiles to the factory default state.
[User App Settings]
Deletes the added widget applications.
[System Settings]
Resets the system settings to the factory default state.
[Address Book]
Deletes the destinations in the address book.
• To delete the server addresses, select [Scan Settings].
To Next Page
Loading...
