Fuji Xerox DocuCentre SC2022

User Guide
274
11.2 Using Software Supplied With the
Machine
11.2.1 Overview
Use the "Software/Product Manual" disc to install the following software.
Print & Scan Hub (Windows
®
)
Print & Scan Hub is software to enable the following features:
• "Checking the Status of the Machine/Jobs/Consumables (P.274)"
• "Notification of Printing Completion/Error (P.275)"
• "Scanning and Easy Editing of the Scanned Image (P.276)"
• "Connecting With a Cloud Storage Service (P.277)"

Checking the Status of the Machine/Jobs/Consumables
Note
• This feature is available only when the machine is connected to a network.
You can check whether an error has occurred on the machine, or check the job status. Also, by starting
CentreWare Internet Services from the Print & Scan Hub, you can check the status of the toner cartridges/drum
cartridges/waste toner container or the amount of paper remaining in the paper trays.
1. Click [Start] > [All Programs] > [Fuji Xerox Print & Scan Hub] > [Print & Scan Hub].
For Windows
®
10, click [Start] > [Fuji Xerox Print & Scan Hub] > [Print & Scan Hub].