Fuji Xerox DocuCentre SC2022

10 Changing the Machine Settings
247
[IP Address]
Displays the IP address assigned to the machine. Enter the IP address when [IP Addressing] is set to [Manual
Input].
[Subnet Mask]
Displays the subnet mask assigned to the machine. Enter the subnet mask when [IP Addressing] is set to
[Manual Input].
[Gateway Address]
Displays the gateway address assigned to the machine. Enter the gateway address when [IP Addressing] is set
to [Manual Input].
[Modem Speed]
Select the communication speed and the duplex settings of Ethernet.
•[Auto]
• [10BASE-T Half]
• [10BASE-T Full]
• [100BASE-TX Half]
• [100BASE-TX Full]
• [1000BASE-TX Full]
[Disable IPsec]
Disables IPsec communication.
Note
• This setting is available only when [IPsec] is enabled on CentreWare Internet Services. For details, see the CentreWare
Internet Services Help.
10.9.4 [Protocol]
Specify whether to enable or disable each protocol.
•[LPD]
• [Port 9100]
•[FTP]
•[IPP]
•[WSD Print]
*1
•[WSD Scan]
*1
•[SNMP UDP]
*2
• [StatusMessenger]
• [Internet Services]
• [Bonjour (mDNS)]
•[Telnet]
• [Update Address Book]
• [HTTP - SSL/TLS]
• [Google Cloud Print]
*1
WSD stands for Web Services on Devices.
*2
SNMP stands for Simple Network Management Protocol.
10.9.5 [Other]
Configure the advanced network settings.