User Guide
248
[IPv4 Filter]
Specifies whether to limit devices that can communicate with the machine. Register the range of IPv4 addresses
that you want to allow to communicate with the machine on CentreWare Internet Services.
• This feature does not apply to communication via Wi-Fi Direct.
[IPv6 Filter]
Specifies whether to limit devices that can communicate with the machine. Register the range of IPv6 addresses
that you want to allow to communicate with the machine on CentreWare Internet Services.
• This feature does not apply to communication via Wi-Fi Direct.
[Disable IEEE 802.1x]
Disables IEEE 802.1x authentication.
• This setting is available only when the machine is connected using an Ethernet cable and the IEEE 802.1x
authentication is enabled on CentreWare Internet Services. For details, see the CentreWare Internet Services Help.
[Reset Network Settings]
Initializes wired network data stored in non-volatile memory (NVM). After performing this setting and restarting
the machine, all the wired network settings are reset to their factory settings.
[Delete All Certificates]
Deletes all certificates of the machine.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
