User Guide
364
13.1 Clearing Jams
WARNING
• If you need to pull out a tray to remove paper jam, contact your local Fuji Xerox representative. Do not pull out
a tray, otherwise it may cause injuries.
• Do not attempt to remove a paper deeply jammed inside the product, particularly a paper wrapped around the
fusing unit or the heat roller. Otherwise, it may cause injuries or burns. Switch off the product immediately and
contact your local Fuji Xerox representative.
• When working on the machine with the power turned off, check that the data LED is off before turning off the machine.
The print data and stored data in the memory is cleared when the machine is turned off.
13.1.1 Clearing Documents
1.
Remove the remaining documents from the Duplex Automatic Document Feeder (DADF).
2.
Pull up the handle and open the document feeder top cover of the Duplex Automatic Document
Feeder (DADF) until it stops.
3.
If the document is yet to be fed into the feeder, remove it.
To Next Page
Loading...
