User Guide
396
Specifications
This section lists the main specifications of the machine. Note that the specifications and the appearance of the
product may change for improvement without prior notice.
Basic Specifications/Copy Function
Type Desktop
Memory Capacity 1 GB (On board)
Colour Capability Full colour
Scan Resolution 600 x 600 dpi
Printing Resolution 1200 x 2400 dpi (Text, Text & Photo, Photo)
Halftone/Printable Colours 256 levels of colour (16.7 million colours)
Warm-up Time 44 seconds or less (at room temperature 23°C)
Recovery Time (from the
sleep mode)
26 seconds or less (at room temperature 23°C)
Original Size Maximum of A3, 11 x 17", 297 x 432 mm for both sheets and books
Paper Size Max: A3, 11 x 17" (297 x 432 mm for Tray 5 (bypass))
Min: A5 (89 x 98 mm for Tray 5 (bypass))
Image loss width: 5.5 mm at lead/trail/right/left edges
Paper Weight Tray 1: 60 - 90 gsm
Tray 2 (One Tray Module): 60 - 256 gsm
Tray 5 (Bypass): 60 - 216 gsm
Important
• The use of paper recommended by Fuji Xerox is suggested. Printing may not
be performed correctly depending on the conditions.
First Copy Output Time Black & White: 8.6 seconds (A4 /Monochrome priority mode)
Colour: 10.8 seconds (A4 /Colour priority mode)
Reduce/Enlarge Size-to-Size: 1:1 ± 0.7%
Preset: 50%, 70%, 81%, 86%, 115%, 122%, 141%, 200%
Variable: 25 - 400% (1% increments)
Continuous Copy Speed A4 : Black & White: 20 sheets/minute, colour: 20 sheets/minute
A4/B4/A3/B5 /B5: Black & White: 12 sheets/minute, colour: 12
sheets/minute
Important
• The speed may be reduced due to image quality adjustment.
Paper Tray Capacity Standard: 250 sheets x 1 tray + Tray 5 (bypass) 98 sheets
Optional: Tray 2 (One Tray Module): 500 sheets
Max: 848 sheets (Standard + Tray 2 (One Tray Module))
Important
• When using 80 gsm paper