10 Changing the Machine Settings
251
[Top & Bottom]
Specify the top and bottom margins.
[Left & Right]
Specify the right and left margins.
[Middle]
Specify the center margin.
[Number Of Cards]
Select the number of cards to be copied at a time when making an ID card copy as the default setting.
10.10.2 [Fax Settings]
Configure the default settings for the fax function.
[Preview]
Specify whether to display the preview of the scanned data before sending a fax as the default setting.
Tap to display the check mark to display the preview.
[Resolution]
Select the default image quality when scanning a document.
[2-Sided Scanning]
Specify whether to scan both sides of documents as the default setting. For two-sided documents, specify
whether the document is bound at the long edge or the short edge.
[Lighten/Darken]
Specify the default density of outgoing faxes.
[Original Size]
Select the default document size to be sent.
When [Auto] is selected, the machine detects and specifies the document size automatically.
[Delay Send]
Specify the default time to start sending when specifying [Delay Send].
10.10.3 [Scan Settings]
Configure the default settings for the scan function.
[File Format]
Select the default file format of the scanned data to be saved.
[Preview]
Specify whether to display the preview of the scanned data before storing or sending as the default setting.
Tap to display the check mark to display the preview.
[Output Color]
Select the default color mode when scanning a document.
To Next Page
Loading...
