Fuji Xerox DocuCentre SC2022

User Guide
152
6.3 Scanning From a Computer
Important
• When you scan a document from your computer, pay close attention when you move away from the machine to
operate your computer with the document loaded in the machine. If another user operates the machine by mistake with
your document loaded in the machine, this may cause a loss of the document or an information leakage. Operate your
computer as close to the machine as possible. Also, check that you have all the pages of your document in hand after
you finish scanning.
6.3.1 For Windows
®
Scanning Using Print & Scan Hub
You can scan documents using the Print & Scan Hub program that is supplied with the machine.
Refer
• You need to install Print & Scan Hub. For details, see "Installing Software for Windows
®
(P.33)."
1. Load a document.
Refer
• For details about loading a document, see "Loading a Document (P.74)."
2. On your computer, click [Start] > [All Programs] > [Fuji Xerox Print & Scan Hub] > [Print & Scan Hub].
For Windows
®
10, click [Start] > [Fuji Xerox Print & Scan Hub] > [Print & Scan Hub].
3. From [Device List], select the machine.
4. Click [Scan].