User Guide
262
10.12.9 [Initialize Print Meter]
Initializes the accounting meters.
10.12.10 [Clear Stored Jobs]
• This setting is available only when [RAM Disk] is enabled. For details, see "[RAM Disk] (P.266)."
Clears print jobs saved using the stored print feature.
[All Documents]
Deletes all print jobs saved using the stored print feature.
[Secure Print]
Deletes print jobs saved using the Secure Print feature.
[Sample Set]
Deletes print jobs saved using the Sample Set feature.
10.12.11 [Non-Genuine Toner]
Specify whether to use toner cartridges of another manufacturer.
• When non-genuine toner cartridges are used, you may not be able to get the optimum performance of the machine.
The warranty does not cover damages caused by using non-genuine toner cartridges.
10.12.12 [Adjust Altitude]
Select the altitude of the location where the machine is installed.
When the altitude is correctly selected, optimum printing quality is attained, and the remaining amount of toner
is correctly displayed.
10.12.13 [Delete Job History]
Clears the job history of all finished jobs.
To Next Page
Loading...
