Fuji Xerox DocuCentre SC2022

User Guide
244
[No Encryption]
Specifies the wireless setting without specifying an encryption type.
[WEP]
Uses WEP for the encryption type.
[Enter 10 or 26 Hex Characters]
Enter the WEP key.
Note
• The [Ad hoc] setting is available only when [Wi-Fi Direct] is disabled.
[WPS]
Specify the wireless network settings using WPS.
[Connect via PIN]
Specifies the wireless setting using the PIN code assigned to the machine.
[IP Mode]
Select the IP mode.
Note
• Wi-Fi Direct cannot be used when [IPv6] is selected.
[Dual Stack]
Uses both IPv4 and IPv6 to specify the IP address.
[IPv4]
Uses IPv4 to specify the IP address.
[IPv6]
Uses IPv6 to specify the IP address.
[TCP/IP]
Configure the TCP/IP settings.
[IP Addressing]
[DHCP/AutoIP]
Specifies the IP address automatically.
[BOOTP]
Specifies the IP address using BOOTP.
[RARP]
Specifies the IP address using RARP.
[DHCP]
Specifies the IP address using DHCP.
[Manual Input]
Specify the IP address manually.
[IP Address]
Displays the IP address assigned to the machine. Enter the IP address when [IP Addressing] is set to [Manual
Input].
[Subnet Mask]
Displays the subnet mask assigned to the machine. Enter the subnet mask when [IP Addressing] is set to
[Manual Input].
[Gateway Address]
Displays the gateway address assigned to the machine. Enter the gateway address when [IP Addressing] is set
to [Manual Input].