10 Changing the Machine Settings
239
[External Phone Hook Threshold]
Select the detection level of an off-hook signal from the external telephone.
[Off Hook Wake Up]
Specify whether to recover from the power saver mode when you pick up the handset of the external telephone.
[Incoming Fax Settings]
Configure the settings for receiving faxes.
[Receive Mode]
Specify the fax receiving mode.
[TEL Mode]
Receives faxes by operating the external telephone or the touch panel. You can receive a fax by picking up the
handset of the external telephone and then pressing the remote receive code, or by tapping [Receive] on the
touch panel.
[FAX Mode]
Automatically receives faxes.
[TEL/FAX Mode]
When the machine receives an incoming call, the external telephone rings for the time specified in [TEL/FAX
Mode] under [Auto Answer Setup], and then the machine starts receiving the fax. When the machine receives
a phone call, the ringtone is heard from the internal speaker.
[Ans/FAX Mode]
This mode is intended for use with an answering machine. When the machine receives an incoming call, the
machine judges whether it is a fax or a telephone. When the machine detects a fax call, the machine
Pattern1–7 Distinctive Ring Pattern Detection (DRPD) is a service provided by some telephone companies. DRPD
Patterns are specified by your telephone company. The following shows the patterns provided with
the machine.
Ask your telephone company which pattern you need to select to use this service. For example,
Pattern7 is the New Zealand FaxAbility distinctive ringing pattern: rings for 400 ms, stops for 800 ms,
rings for 400 ms and stops for 1400 ms. This pattern is repeated over and over again. This machine
only responds to Distinctive Alert cadence(s) DA4 in New Zealand.
Pattern1
Pattern2
Pattern3
Pattern4
Pattern5
Pattern6
Pattern7
To Next Page
Loading...
Need help?
General
Weight and Dimensions
