User Guide
344
2.
Click [Log In] on the upper right corner.
• If [Local User] is displayed on the upper right corner, proceed to step 4.
3.
Enter the [User Name] and [Password] for the administrator, and then click [Log In].
• For details about the default user name and password, see "Logging In As the Administrator (P.273)."
4.
Click [Connectivity] on the left pane of the screen.
5.
Click [Wi-Fi] in [Connections].
6.
From the [Encryption Type] in [Security Settings], select [WPA2 Enterprise].
• This setting is available only when [Infrastructure] is specified for [Network Type].
7.
From [Authentication Method], select [EAP-TLS].
8.
Click [Root Certificate], and then select the root certificate.
9.
Click [Client Certificate], and then select the client certificate.
10.
Specify [EAP-Identity].
11.
Click [OK].
12.
Click [Restart Now].
13.
When restarting the machine is complete, click [Refresh].
For PEAPv0 MS-CHAPv2, EAP-TTLS/PAP, and EAP-TTLS/CHAP
1.
Enter the IP address of the machine in your web browser and start CentreWare Internet Services.
• To check the IP address of the machine, press the <Home> button on the operator panel, and then tap [Device] >
[About].
To Next Page
Loading...
