GEM SK760 User Manual

○○○○○○○○○○○○○○○○○○○○○○
4•4 Reference Guide
○○○○○○○○○○○○○○○○○○○○○○
4•4 Reference Guide
8. Press ENTER to confirm your choice.
You will be prompted with “Are you sure?”.
9. Press ENTER again to execute the command,
or ESCAPE to cancel the operation.
With ENTER, the command is executed and
a dialog window opens showing a message
relating to the current operation. For exam-
ple, if you are loading a single Song, the
message will say: “Loading Single Song....”
When the dialog window closes, the opera-
tion has been executed.
10.Repeat steps 6, 7, 8 and 9 until your desti-
nation is organized according to your re-
quirements.
To select another file from a different block,
return to the source column, press Escape
to escape the current Block, press Escape
again to exit the File Selector, select another
Block, press Enter to gain access and con-
tinue as already described.
11.Press DISK (or ESCAPE three times) to exit
«Disk».
Pressing DISK escapes the Disk operations
and remembers the last page selected.
Pressing ESCAPE allows you to (1) close the
current Block, (2) close the file selector and
(3) escape from «Disk».
8. Press ENTER to confirm your choice.
You will be prompted with “Are you sure?”.
9. Press ENTER again to execute the command,
or ESCAPE to cancel the operation.
With ENTER, the command is executed and
a dialog window opens showing a message
relating to the current operation. For exam-
ple, if you are loading a single Song, the
message will say: “Loading Single Song....”
When the dialog window closes, the opera-
tion has been executed.
10.Repeat steps 6, 7, 8 and 9 until your desti-
nation is organized according to your re-
quirements.
To select another file from a different block,
return to the source column, press Escape
to escape the current Block, press Escape
again to exit the File Selector, select another
Block, press Enter to gain access and con-
tinue as already described.
11.Press DISK (or ESCAPE three times) to exit
«Disk».
Pressing DISK escapes the Disk operations
and remembers the last page selected.
Pressing ESCAPE allows you to
(1) close the
current Block,
(2) close the file selector and
(3) escape from «Disk».
○○○○○○○○○○○○○○○○○○○○○○
Disk 4•9
○○○○○○○○○○○○○○○○○○○○○○
Disk 4•9
4. Select the User Group that you wish to load
and its corresponding destination in RAM (1,
2, 3 or 4).
5. Press ENTER twice to load the User Style
Group file to memory.
User Style Groups can be interchanged. For
example, User Group 3 on floppy disk can
be loaded to User Group 1 in RAM.
LOAD ALL
Use «Load All» to load an entire set of file types
in a single step.
1. Select ALL SONG from the main Load page.
2. Press ENTER to enter to the File Selector
3. Select the Block containing the Songs re-
quired from the source directory then press
ENTER twice to start the loading procedure.
Warning: Use “Load ALL” with care. If, for exam-
ple, the disk-based «All User Style» data contains
only one User Style, all your User Styles currently in
RAM will be irremediably lost through cancellation
by the incoming file. Be absolutely sure, therefore,
that your Sounds, Songs, Styles and Performances
are safely stored to Disk or Hard Disk before using
the “Load ALL” procedures.
Load All offers the following possibilities:
Load All Song: loads up to 16 Songs;
Load All Sound: an unspecified number of Ram-
Sounds and RAM -Sounds;
Load All Real Perf: loads up to 8 Groups of
Performances;
Load All Style Perf: loads up to 12 Groups of
Rom Style Performance banks, each containing
up to 8 Style Performances;
4. Select the User Group that you wish to load
and its corresponding destination in RAM (1,
2, 3 or 4).
5. Press ENTER twice to load the User Style
Group file to memory.
User Style Groups can be interchanged. For
example, User Group 3 on floppy disk can
be loaded to User Group 1 in RAM.
LOAD ALL
Use «Load All» to load an entire set of file types
in a single step.
1. Select ALL SONG from the main Load page.
2. Press ENTER to enter to the File Selector
3. Select the Block containing the Songs re-
quired from the source directory then press
ENTER twice to start the loading procedure.
Warning: Use “Load ALL” with care. If, for exam-
ple, the disk-based «All User Style» data contains
only one User Style, all your User Styles currently in
RAM will be irremediably lost through cancellation
by the incoming file. Be absolutely sure, therefore,
that your Sounds, Songs, Styles and Performances
are safely stored to Disk or Hard Disk before using
the “Load ALL” procedures.
Load All offers the following possibilities:
Load All Song: loads up to 16 Songs;
Load All Sound: an unspecified number of Ram-
Sounds and RAM
-Sounds;
Load All Real Perf: loads up to 8 Groups of
Performances;
Load All Style Perf: loads up to 12 Groups of
Rom Style Performance banks, each containing
up to 8 Style Performances;

GEM SK760 Specifications

General

Brand	GEM
Model	SK760
Category	Electronic Keyboard
Language	English