○○○○○○○○○○○○○○○○○○○○○○
4•26 Reference Guide
○○○○○○○○○○○○○○○○○○○○○○
4•26 Reference Guide
5. Press EXECUTE to start the hard disk re-
store process.
When the Hard Disk Restore has finished, a
message is displayed saying: “Operation
completed”.
If the Hard Disk Restore operation requires
more than one disk, a dialogue appears re-
questing the insertion of disk n. 2 and so on.
HARD DISK RESTORE OPTIONS
DELETE (F5)
Select DELETE (F5) to cancel a block from the
list.
The Delete option does not cancel a Block from
the Restore directory.
RESET (F6)
Select RESET (F6) to cancel a list containing two
or more Blocks in a single step.
SELECT ALL (F7)
Use Select All (F7) to select all the Blocks con-
tained in the Restore directory.
EXECUTE (F8)
Press EXECUTE (F8) to start the restore proc-
ess.
MULTICOPY H.DISK TO SCSI
This option allows you to copy more than one
Block file at a time (a batch) from Hard Disk to a
SCSI device of your choice.
1. With the Multicopy H.Disk to SCSI option
selected, press ENTER to open the SCSI
Drive selection window.
2. Select the drive and press ENTER to enter
the file selector.
3. Prepare a list of Block files to copy.
Select a Block and press ENTER to insert it
into the list. The cursor moves down to the
next empty location automatically.
Repeat the operation for other Blocks.
4. Press EXECUTE to start the copy process.
5. Press EXECUTE to start the hard disk re-
store process.
When the Hard Disk Restore has finished, a
message is displayed saying: “Operation
completed”.
If the Hard Disk Restore operation requires
more than one disk, a dialogue appears re-
questing the insertion of disk n. 2 and so on.
HARD DISK RESTORE OPTIONS
DELETE (F5)
Select DELETE (F5) to cancel a block from the
list.
The Delete option does not cancel a Block from
the Restore directory.
RESET (F6)
Select RESET (F6) to cancel a list containing two
or more Blocks in a single step.
SELECT ALL (F7)
Use Select All (F7) to select all the Blocks con-
tained in the Restore directory.
EXECUTE (F8)
Press EXECUTE (F8) to start the restore proc-
ess.
MULTICOPY H.DISK TO SCSI
This option allows you to copy more than one
Block file at a time (a batch) from Hard Disk to a
SCSI device of your choice.
1. With the Multicopy H.Disk to SCSI option
selected, press ENTER to open the SCSI
Drive selection window.
2. Select the drive and press ENTER to enter
the file selector.
3. Prepare a list of Block files to copy.
Select a Block and press ENTER to insert it
into the list. The cursor moves down to the
next empty location automatically.
Repeat the operation for other Blocks.
4. Press EXECUTE to start the copy process.
○○○○○○○○○○○○○○○○○○○○○○
Performances - Edit Performance 3•11
○○ ○○○○○○○○○○○○○○○○○○○○
Performances - Edit Performance 3•11
RANDOM PAN (F3)
This function will automatically shift the pan po-
sition of the current track by a random amount
whenever a new note is played. The amount of
shift limited by the value you select. At maxi-
mum level, (7), the pan position may shift com-
pletely to the left or right channel
Value range: 0 (no effects) ... 7 (maximum ran-
domness).
AUDIO OUT (F4)
Routing of the tracks to the audio outputs. The
parameter is important only when the tracks are
connected to the internal sound generation.
Normally the SK760/880SE sends sounds to both
LEFT and RIGHT outputs, but it is possible to
send some tracks to the auxiliary 1 and 2 out-
puts, for an external mixing operation and a wider
sound ‘opening’.
The outputs selection also affects the internal
amplification.
Options: Left+Right, Out1+Out2, Out1, Out2.
3D EFFECT (F5)
The 3D effect is a spatializer which adds dimen-
sion to the SK760/880SE Sounds.
BASS: A Bass equalizer which adds or removes
the bass frequencies.
Value range: –12dB … +12dB
3D: A spatializer which affects the stereo out-
puts of the instrument. The effect is not heard if
the instrument is connected to a mono amplifica-
tion system.
Value range: –3dB ... –12dB.
RANDOM PAN (F3)
This function will automatically shift the pan po-
sition of the current track by a random amount
whenever a new note is played. The amount of
shift limited by the value you select. At maxi-
mum level, (7), the pan position may shift com-
pletely to the left or right channel
Value range: 0 (no effects) ... 7 (maximum ran-
domness).
AUDIO OUT (F4)
Routing of the tracks to the audio outputs. The
parameter is important only when the tracks are
connected to the internal sound generation.
Normally the SK760/880SE sends sounds to both
LEFT and RIGHT outputs, but it is possible to
send some tracks to the auxiliary 1 and 2 out-
puts, for an external mixing operation and a wider
sound ‘opening’.
The outputs selection also affects the internal
amplification.
Options: Left+Right, Out1+Out2, Out1, Out2.
3D EFFECT (F5)
The 3D effect is a spatializer which adds dimen-
sion to the SK760/880SE Sounds.
BASS: A Bass equalizer which adds or removes
the bass frequencies.
Value range: –12dB … +12dB
3D: A spatializer which affects the stereo out-
puts of the instrument. The effect is not heard if
the instrument is connected to a mono amplifica-
tion system.
Value range: –3dB ... –12dB.
To Next Page
Loading...
