○○○○○○○○○○○○○○○○○○○○○○
2•12 Reference Guide
○○○○○○○○○○○○○○○○○○○○○○
2•12 Reference Guide
6. Press ENTER to save the new file to the se-
lected location.
The new Drumkit/SoundPatch is now availa-
ble as a RAM-Sound.
As any new RAM-Sound, the new Drumkit/
SoundPatch will remain in memory after pow-
er down. To conserve it and safeguard it
against future cancellation, save it to disk
using the Save Single Sound, Save All Sound
or Save All procedures.
SAVE THE MODIFICATIONS TO A PERFORMANCE
1. Press F8 («Store...»). The «Store» dialog
window appears:
2. Select the Performance option with the cur-
sor button and press ENTER to confirm.
The «Drumkit store» dialog window opens:
3. Select the Performance or Style-Performance
option with the / cursor arrows.
4. Rotate the DIAL to select the Performance
or Style Performance Group to store to.
5. Move down to the Performance option with
the
cursor button and select the Perform-
ance to save to with the DIAL.
6. Press ENTER to confirm or ESCAPE to cancel.
6. Press ENTER to save the new file to the se-
lected location.
The new Drumkit/SoundPatch is now availa-
ble as a RAM-Sound.
As any new RAM-Sound, the new Drumkit/
SoundPatch will remain in memory after pow-
er down. To conserve it and safeguard it
against future cancellation, save it to disk
using the Save Single Sound, Save All Sound
or Save All procedures.
SAVE THE MODIFICATIONS TO A PERFORMANCE
1. Press F8 («Store...»). The «Store» dialog
window appears:
2. Select the Performance option with the cur-
sor button
and press ENTER to confirm.
The «Drumkit store» dialog window opens:
3. Select the Performance or Style-Performance
option with the
/ cursor arrows.
4. Rotate the DIAL to select the Performance
or Style Performance Group to store to.
5. Move down to the Performance option with
the cursor button and select the Perform-
ance to save to with the DIAL.
6. Press ENTER to confirm or ESCAPE to cancel.
○○○○○○○○○○○○○○○○○○○○○○
Edit Song 6•25
○○○○○○○○○○○○○○○○○○○○○○
Edit Song 6•25
Modifies the key Velocity. This parameter repre-
sents the speed with which a note is played, or
its intensity. Generally, the greater the velocity
the higher the volume. Velocity also affects the
filter of many sounds, rendering them brighter with
increased velocity.
PARAMETERS
VELOCITY MODE
Provides two velocity modes to choose from
which affect the way the “Change Velocity” func-
tion operates.
Normal - The value indicated in «Velocity
change» is added to or subtracted from the
key Velocity values.
Fixed - The key Velocities are all set to the
value specified in the «Change Velocity» pa-
rameter.
CHANGE VELOCITY
Specifies the amount by which the velocity val-
ues can be changed. This depends on the option
selected in «Velocity Mode».
NOTE RANGE FROM... TO...
Assigns the upper and lower limits of the notes
to be affected. To modify the velocity of a single
percussive instrument of the Drum track, assign
the same note to the highest and lowest limit.
For example, to change the snare (D2) set the
parameter to «Note range from D2 to D2».
Assignable values: C-1 ... G9.
Velocity
FROM LOCATOR... TO LOCATOR...
Determines the start and end point of the part to
be affected. It is possible to specify Measure,
Beat and ‘tick’.
Assignable values: within the actual limits of the
Song. It is not possible to specify a point beyond
the end of the Song.
Modifies the key Velocity. This parameter repre-
sents the speed with which a note is played, or
its intensity. Generally, the greater the velocity
the higher the volume. Velocity also affects the
filter of many sounds, rendering them brighter with
increased velocity.
PARAMETERS
VELOCITY MODE
Provides two velocity modes to choose from
which affect the way the “Change Velocity” func-
tion operates.
Normal - The value indicated in «Velocity
change» is added to or subtracted from the
key Velocity values.
Fixed - The key Velocities are all set to the
value specified in the «Change Velocity» pa-
rameter.
CHANGE VELOCITY
Specifies the amount by which the velocity val-
ues can be changed. This depends on the option
selected in «Velocity Mode».
NOTE RANGE FROM... TO...
Assigns the upper and lower limits of the notes
to be affected. To modify the velocity of a single
percussive instrument of the Drum track, assign
the same note to the highest and lowest limit.
For example, to change the snare (D2) set the
parameter to «Note range from D2 to D2».
Assignable values: C-1 ... G9.
Velocity
FROM LOCATOR... TO LOCATOR...
Determines the start and end point of the part to
be affected. It is possible to specify Measure,
Beat and ‘tick’.
Assignable values: within the actual limits of the
Song. It is not possible to specify a point beyond
the end of the Song.
To Next Page
Loading...
