GEM SK760 - Melody off

○○○○○○○○○○○○○○○○○○○○○○
8•2 Reference Guide
○○○○○○○○○○○○○○○○○○○○○○
8•2 Reference Guide
General Controls
Tuning/Scale
MASTER PITCH
Fine tunes the instrument as a whole in fractions
of 1/64 of a semitone.
Assignable values: -63...+63.
KEYBOARD SCALE
Provides a selection of Temperaments (Scales).
Options: Equal, Inverse, Meantone, Werkmeister
III, Arabian 1, Arabian 2, User1 ... User8.
USER PROGRAMMABLE SCALES
You can program your own scale using the key-
board map shown at the bottom of the display.
This graphical representation shows the current
pitch of the notes of an octave. The octave cur-
rently in edit is shown in the title bar directly above
the keyboard (e.g. Octave C-1/B-1). Each note
shows the coarse tune and fine tune status. The
programming tasks allow you to alter the pitch of
one or more notes by modifying the coarse and
fine tuning parameters of the current scale.
Edit General: General controls Edit General: Master pitch & Keyboard Scale
Fine tuning in 64ths of a semitone
Octave (select F5 for «Octave Up»
or F6 for «Octave Down»).
Actual note
Coarse tuning
KEYBOARD SENSITIVITY
Determines the response of the keyboard to ve-
locity changes.
Assignable values: Soft, Medium soft, Medium,
Medium hard, Hard.
FOOTSWITCH POLARITY
FOOTSWITCH 1, 2, 3
Sets the polarity of the programmable pedals 1,
2, 3. Generalmusic pedals are of the NC type.
Options: NC (Normally Closed), NO (Normally
Open).
General Controls
Tuning/Scale
MASTER PITCH
Fine tunes the instrument as a whole in fractions
of 1/64 of a semitone.
Assignable values: -63...+63.
KEYBOARD SCALE
Provides a selection of Temperaments (Scales).
Options: Equal, Inverse, Meantone, Werkmeister
III, Arabian 1, Arabian 2, User1 ... User8.
USER PROGRAMMABLE SCALES
You can program your own scale using the key-
board map shown at the bottom of the display.
This graphical representation shows the current
pitch of the notes of an octave. The octave cur-
rently in edit is shown in the title bar directly above
the keyboard (e.g. Octave C-1/B-1). Each note
shows the coarse tune and fine tune status. The
programming tasks allow you to alter the pitch of
one or more notes by modifying the coarse and
fine tuning parameters of the current scale.
Edit General: General controls Edit General: Master pitch & Keyboard Scale
Fine tuning in 64ths of a semitone
Octave (select F5 for «Octave Up»
or F6 for «Octave Down»).
Actual note
Coarse tuning
KEYBOARD SENSITIVITY
Determines the response of the keyboard to ve-
locity changes.
Assignable values: Soft, Medium soft, Medium,
Medium hard, Hard.
FOOTSWITCH POLARITY
FOOTSWITCH 1, 2, 3
Sets the polarity of the programmable pedals 1,
2, 3. Generalmusic pedals are of the NC type.
Options: NC (Normally Closed), NO (Normally
Open).
○○○○○○○○○○○○○○○○○○○○○○
Quick Guide 1•39
○○ ○○○○○○○○○○○○○○○○○○○○
Quick Guide 1•39
3. Press ENTER to access the SMF folder.
A list of MIDI Files is shown.
4. Use the directional arrows to select a MIDI
File that you want to listen to.
3/4
5. Press PLAY to start the MIDI File playback.
During the playback, you can deactivate the
melody by pressing the MELODY ON soft
button (F3) i order to play the melody your-
self.
The option changes to MELODY OFF.
Press the same soft button (F3) to restore
the melody (MELODY ON).
When the end of the MIDI File is reached,
playback stops.
Repeat the selection procedure and press
PLAY to listen to other MIDI Files.
6. Press EXIT (F8) to escape from the Midi File
Player.
You can refer to the SONG chapter in the
Reference Guide for information regarding all
the MIDI FILE PLAYER options.
5
6
3. Press ENTER to access the SMF folder.
A list of MIDI Files is shown.
4. Use the directional arrows to select a MIDI
File that you want to listen to.
3/4
5. Press PLAY to start the MIDI File playback.
During the playback, you can deactivate the
melody by pressing the MELODY ON soft
button (F3) i order to play the melody your-
self.
The option changes to MELODY OFF.
Press the same soft button (F3) to restore
the melody (MELODY ON).
When the end of the MIDI File is reached,
playback stops.
Repeat the selection procedure and press
PLAY to listen to other MIDI Files.
6. Press EXIT (F8) to escape from the Midi File
Player.
You can refer to the SONG chapter in the
Reference Guide for information regarding all
the MIDI FILE PLAYER options.
5
6