Gilera GP 800 i.e. - Page 173

- Undo the six fixing screws and remove the cover
from the opposite side.
- Undo the four screws and remove the plate.
N.B.
THE PLATE FORMS AN INTEGRAL UNIT WITH
THE PINION DRIVING BUSHING AND THE
SUPPORT. ONCE THE PLATE IS UN-
SCREWED, REMOVE THE PINION.
- Remove the pinion driving bushing plus the pin-
ion, bearings and spacer from the support.
- Slide off the components from the driving bush-
ing.
GP 800 i.e. Engine
ENG - 23