Gilera GP 800 i.e. - Page 174

- Remove the oil seal indicated.
- Fit the specific tool and pull out the bearing working from inside the pinion unit.
Specific tooling
020360Y Adaptor 52x54 mm
020662Y Guide 50 mm
020376Y Adaptor handle
- Drive a new bearing with the specific tool working
from outside the pinion unit.
Specific tooling
020655Y Adaptor 62x68 mm
020662Y Guide 50 mm
020376Y Adaptor handle
- Fit the specific tool and drive a new oil seal work-
ing from inside the pinion unit.
Specific tooling
020655Y Adaptor 62x68 mm
020662Y Guide 50 mm
020376Y Adaptor handle
Engine GP 800 i.e.
ENG - 24