Gilera GP 800 i.e. - Page 229

- Place the coupling gasket.
- Fit the specific tool on the flywheel-side crank-
shaft, being particularly careful that the tool match-
es the shaft perfectly.
CAUTION
FAILURE TO OBSERVE THIS RULE CAN DAM-
AGE THE MAIN BUSHINGS.
Specific tooling
020664Y Flywheel side crankshaft fitting tip
- Lubricate the external surface of the tip with petroleum jelly grease.
N.B.
LUBRICATE THE BUSHINGS WITH ENGINE OIL BEFORE FITTING THE CRANKSHAFT.
GP 800 i.e. Engine
ENG - 79