Gilera GP 800 i.e. - Page 242

N.B.
VISUALLY INSPECT THAT ALL THE COMPO-
NENTS ARE IN GOOD CONDITIONS. MAKE
SURE THERE ARE NO SIGNS OF WEAR OR
SCRATCHES. REPLACE THE COMPONENTS
IF THERE ARE EVIDENT SIGNS OF WEAR.
- Once you check that the components are in good
conditions, fit the pump and check size.
- Fit the two rotors and align them following the
reference marks.
- Fit the assembled rotors inside the pump body,
with the reference marks facing the inside.
CAUTION
ONCE THE ROTORS ARE FITTED IN THE
PUMP BODY, THE REFERENCE MARKS ON
THEM MUST NOT BE VISIBLE.
Engine GP 800 i.e.
ENG - 92