Gilera GP 800 i.e. - Page 322

- Lock the pin from the vehicle right side, tighten
the fork pin locking nut to the prescribed torque.
Locking torques (N*m)
Fork pin nut 90 ± 5
- Tighten the two screws together with the wash-
ers, thus fixing the rear brake pipes.
CAUTION
UPON FITTING, BE PARTICULARLY CAREFUL
WHEN INSERTING THE BREATHER PIPE IN
THE FORK SLOT.
Centre-stand
See also
Exhaust assy. Removal
Suspensions GP 800 i.e.
SUSP - 36