GW Instek GDM-906 Series - Page 209

REMOTE CONTROL
209
11. Press the F5 (Enter) key or
Knob key followed by scrolling
Knob key or pressing +/- keys
to land on the desired RS232:
TX Term - EndOfLine option.
12. Press the F5 (Enter) key or
Knob key again to confirm the
desired RS232: TX Term
EndOfLine option.
NOTE
GPIB, USBTMC and LAN are fixed
with only LF option.
13. Press the F4 (NEXT) key
repeatedly or scroll the Knob
key to move to the RS232: TX
Term - Separation field.