GW Instek GDM-906 Series - Page 23

GETTING STARTED
23
Second function
menu
It indicates the active bottom menu
corresponding to functional keys is the
second menu. Click the Knob key (Enter)
to switch to the first function menu.
Digital I/O –
4094 mode
It indicates Digital I/O – 4094 mode is
enabled. Refer to page 120 for details.
Digital I/O –
User mode
It indicates Digital I/O – User mode is
enabled. Refer to page 120 for details.
Flash Drive –
Capture
It indicates the Capture mode is ready
for the connected flash drive. Refer to
the page 171 for details of Capture.
Flash Drive –
Save Reading
It indicates the Save Reading mode is
ready for the connected flash drive. Refer
to page 175 for details of Save Reading.
Flash Drive –
Failure
It indicates something error occurs and
thus flash drive fails to connect to unit.
Sound – Beep
It indicates sound of beep is enabled.
Refer to page 135 for details.
Sound - Key
It indicates sound of key is enabled.
Refer to page 136 for details.
Sound – All
It indicates sounds of beep and key are
both enabled.
Sound – Off
It indicates sounds of beep and key are
both disabled.
Internet On
It indicates internet connection is
established. Refer to page 216 for details.
Internet Off
It indicates internet connection is Not
well established.
Time Display
It indicates the time display. For detailed
setting, refer to page 138.