GW Instek GDM-906 Series User Manual

GDM-906X Series User Manual
278
MEASure2:FREQuency?
Returns the frequency measurement value on the 2
nd
display.
Parameter: [None] | [Range(<NRf> | AUTO | MIN | MAX | DEF)]
Example: MEAS2:FREQ?
> +0.21501429E+05
Returns the frequency measurement value as 21.5kHz.
MEASure2:PERiod?
Returns the period measurement value on the 2
nd
display.
Parameter: [None] | [Range(<NRf> | AUTO | MIN | MAX | DEF)]
Example: MEAS2:PER? MAX
Returns the period measurement value at the maximum range.
SENSe Related Commands
[SENSe:]FUNCtion[X]
Sets the function for the 1
st
or 2
nd
display, which X = 1 indicate 1
st
display, X
= 2 indicate 2
nd
display
Parameter:
(1
st
):"VOLT[:DC]", "VOLT:AC", "CURR[:DC]", "CURR:AC", "RES", "FRES",
"FREQ", "PER", "TEMP:TCO", "TEMP:RTD", "TEMP:FRTD", "TEMP:THER",
"TEMP:FTH", "CAP", "DIOD", "CONT"
(2
nd
): "VOLT[:DC]", "VOLT:AC", "CURR[:DC]", "CURR:AC", "FREQ", "PER",
"NON"
Example: SENS:FUNC1 "VOLT:DC"
Sets the 1
st
display to the DCV function.
[SENSe:]FUNCtion[X]?
Returns the function displayed on the 1
st
or 2
nd
display, which X = 1 indicate
1
st
display, X = 2 indicate 2
nd
display
Return parameter:
(1
st
): “VOLT”, “VOLT:AC”, “CURR”, “CURR:AC”, “RES”, “FRES”, “FREQ”,
“PER”, “TEMP”, "CAP", “DIOD”, “CONT”
(2
nd
): “VOLT”, “VOLT:AC”, “CURR”, “CURR:AC”, “FREQ”, “PER”, “NON”
[SENSe:]DATA?
Returns the auxiliary measurement value.
[SENSe:]DIGital:SHIFt
Sets the digital shift function on or off.
Parameter: 0 | 1 | ON | OFF
Example: SENS:DIG:SHIF ON
Turn the digital shift function on.

GW Instek GDM-906 Series Specifications

General

Brand	GW Instek
Model	GDM-906 Series
Category	Measuring Instruments
Language	English