GDS-1000B Programming Manual
10
Press Backspace to delete a
character.
Press Save Now to save the
configuration. Complete will be
displayed when successful.
Configure Socket Server
The GDS-1000B supports socket server functionality for direct two-
way communication with a client PC or device over LAN. By default,
the Socket Server is off.
1. Configure the IP address for the
GDS-1000B.
2. Press the Utility key.
3. Press I/O from the bottom menu.
4. Press Socket Server from the side
menu.
5. Press Select Port and choose the
port number with the Variable
knob.
6. Press Set Port to confirm the port
number.
7. The Current Port icon will update
to the new port number.
To Next Page
Loading...
Need help?
General
