Harris Constellation - Page 278

Constellation™ November 2003
Index-2
AUX port
3-15, 9-4, A-8, A-9
pinouts A-10
B
B direction 1-19
backplane
battery block and customer-configured
alarms
3-23
customer access area 3-15
battery noise requirement
3-21
battery polarity
3-21
battery power wires
connecting 3-7
battery power wiring
repeater 3-23
terminal 3-22
battery voltage and noise, testing
3-21
battery voltage, testing
3-7
BER test
tributary 4-11
BER test set
3-3
BER, Performance submenu
B-8
bill of material, checking against
2-2
bill of materials
E-2
block diagram, alarm path
10-6
BNC connector
3-15, A-8
specifications A-11
BNC connectors
9-4
booting software
9-11
break in the loop
D-1
business hours, Technical Assistance
Center
12-9
C
cable
power 3-22
rack-grounding 3-2
twisted-pair 6-2
cable length, interconnection cables
3-16
cable ties
3-2
cable to link the VF and pilot signals
D-3
cables connecting the VF and data
D-5
cables, interconnection
connecting 3-7
cabling
interconnection 3-14, 3-15
cabling requirements, interconnection
3-16
CAN port
3-15, 9-4, A-8, A-9
cable connection 3-13
pinouts A-10
terminated 3-13
Canada
technical support numbers 12-9
training center 12-10
charges, repair
12-5
circuit breaker
3-22, 3-24
Class A
computing device 1-6
limits for radiated emissions 1-6
classes for customers
12-10
CLK command, Alarm submenu
B-6
collect shipments
12-12
COMM PORT SETTINGS command,
Configuration submenu
B-10
Community ID
6-4
condition of merchantability
12-12
configuration
rack-mounting for repeater 1-8
configuration alarm
5-7
Configuration submenu
check after new software 9-2
hidden menu B-10, B-12
Keypad menu B-10
configuration, factory
2-1